Choose a country or area to see content specific to your location
What are you looking for?
-
-
3D Interconnect Designer
3D Interconnect Designer provides a flexible modeling and optimization environment for any advanced interconnect structure, including chiplets, stacked die, packages, and PCBs.
-
Save up to 50% on an XR8 Oscilloscope
Get faster digital validation for less with a trade-in.
-
Discover Keysight AI Data Center Builder
Emulate every part of your data center infrastructure. Emulate Anything. Optimize Everything.
-
Accelerate Signal Analysis with X-Series Measurement Applications
Use 25+ X-Series applications to analyze, demodulate, and troubleshoot signals across wireless, aerospace/defense, EMI, and phase noise.
-
Introducing AI-Enhanced Packet Brokers
With extra memory and storage, these enhanced NPBs run Keysight's AI security and performance monitoring software and AI stack.
-
Precision In-Circuit Testing for Production
Achieve fast, accurate board-level testing with robust inline and offline ICT designed for modern manufacturing.
-
Accelerate Your Innovation Engine
Explore curated support plans, prioritized to keep you innovating at speed.
-
448 Gb/s Waveform Generation
Achieve 200+ Gbaud multi-level modulated signals with high-speed AWGs for digital and optical standards.
-
Stream 120 MHz I/Q Data to Your Laptop in the FieldPinpoint interference with post-processing spectrum management software in the lab.
Find the Right ATE Power SolutionUse this selector tool to quickly identify the best power supply for your aerospace and defense ATE requirements.
-
- Solutions
-
Explore engineer-authored content and a vast knowledge base with thousands of learning opportunities.
FeaturedKeysight Learn offers immersive content on topics of interest, including solutions, blogs, events, and more.
- Buy
-
Quick access to support related self-help tasks.
Additional content to support your product needs.
Do more with Keysight ServicesExplore services to accelerate every step of your innovation journey.
Accessories
Explore the complete portfolio of Keysight accessories designed to complement and extend your instruments. Use the filters below to quickly find compatible accessories such as modules, cables, adapters, and other system components to configure, expand, and optimize your test system for your specific measurement needs.
Showing 12 of 1579
-
125
-
990
No Filter available
InfiniiMax Ultra Probe Amplifier, 25 GHz
Best probes for measuring signals found in the latest DDR5 and MIPI standards.
Best probes for measuring signals found in the latest DDR5 and MIPI standards.
InfiniiMax Ultra Probe Amplifier, 25 GHz
MX0025A
Best probes for measuring signals found in the latest DDR5 and MIPI standards.
- Test and validate high-speed technologies such as DDR5 / MIPI with the 25 GHz probe amplifier (AP2).
- Experience the highest input impedance in midband frequencies for low-energy probing.
- Boost test margins with the lowest signal degradation.
- Probe small devices with the super-flexible micro probe head or choose from the widest variety of compatible probe heads for your unique application.
- Measure differential, single-ended, and common mode signals with a single probe tip.
- Use with Infiniium UXR-, 90000 X-, Q-, V-, and Z-Series oscilloscopes.
Keysight’s MX0025A InfiniiMax Ultra Series probe amplifier improves usability because you can measure differential, single-ended, and common mode signals with a single probe tip.
When you use a probe to connect your signal to your oscilloscope, it becomes part of the circuit affecting your test. Your probe may be hiding signal details, loading down your signal, or distorting it. InfiniiMax Ultra Series probes have the lowest loading for minimal impact to your circuit. Boost your test margins and gain measurement confidence with their unprecedented accuracy. Ensure your entire measurement system is helping you see the truest representation of your signal.
These probes have the lowest noise and capacitive loading and the lowest loading across more frequencies due to their RC high impedance profile. The InfiniiMax Ultra Series supports InfiniiMode and has a user-defined AC calibration mode, a wider input voltage range, more accuracy with unique S-parameter characterization, lower capacitive loading, a wider input voltage range, micro / socketed probe heads for smaller density probing, and more bandwidths. The InfiniiMax Ultra Series has an RC input impedance architecture with the lowest loading and least signal distortion across the widest frequency range.
InfiniiMax Ultra probes have three attenuation ranges — 1:1, 4:1, and 8:1 — giving you superior noise performance and large voltage ranges, all while maintaining maximum bandwidth. The input range automatically configures depending on the size of the input signal and vertical scale of your oscilloscope.
Choose from the three flexible input dynamic ranges from 600 mVpp at 1:1, 2.5 Vpp at 4:1, and 5 Vpp at 8:1. Clearly see and know when your design is satisfactory, keep up with standards, easily probe small devices, and reduce test complexity with the InfiniiMax Ultra Series probes.
Automotive Ethernet Test Fixture
The AE6941A Automotive Ethernet Test Fixture provides easy access to automotive Ethernet signals for conformance testing and device characterization.
The AE6941A Automotive Ethernet Test Fixture provides easy access to automotive Ethernet signals for conformance testing and device characterization.
Automotive Ethernet Test Fixture
AE6941A
The AE6941A Automotive Ethernet Test Fixture provides easy access to automotive Ethernet signals for conformance testing and device characterization.
The AE6941A Automotive Ethernet Electrical Test Fixture provides easy access to automotive Ethernet electrical signals so you can perform conformance testing and device characterization quickly and easily.
You can use this breakout board with the AE6942A, AE6943A, and AE6960A adapters to support the Keysight AE6900T, AE6900R, and AE6900L automotive Ethernet electrical conformance applications to provide fast and accurate design validation and debug of transmit receive and link segment signals.
Features
- Complete 100BASE-T1 automotive Ethernet signal access for conformance testing and characterization
- Compliant with IEEE 802.3bw and IEEE 802.3b
- Flexible subMiniature A (SMA) connections for ease-of-use
- Versatile adapter boards available for various connector types including Mini-50, MATEnet and H-MTD
Supports standards
- IEEE 802.3bw 100 Mb/s
- IEEE 802.3bp 1000 Mb/s
- IEEE 802.3ch multigigabit
34945EXT Distribution Board, for Two 84904/5/6/7/8 or 8494/5/6 Step Attenuators
Connect the 34945EXT to two 84904/5/6/7/8 or 8494/5/6 step attenuators for precise RF switching control.
Connect the 34945EXT to two 84904/5/6/7/8 or 8494/5/6 step attenuators for precise RF switching control.
34945EXT Distribution Board, for Two 84904/5/6/7/8 or 8494/5/6 Step Attenuators
Y1153A
Connect the 34945EXT to two 84904/5/6/7/8 or 8494/5/6 step attenuators for precise RF switching control.
The Y1150A-Y1155A distribution boards enable simple connections to the external switches. The distribution boards plug onto the 34945EXT and are used to route the power and control signals from the driver module to the switches using standard cables.
Soft Carrying Case for 1000 X-Series Oscilloscope
Designed for the 1000 X-series oscilloscope; features padded sides and bottom, and a storage pouch for accessories
Designed for the 1000 X-series oscilloscope; features padded sides and bottom, and a storage pouch for accessories
Soft Carrying Case for 1000 X-Series Oscilloscope
N2738A
Designed for the 1000 X-series oscilloscope; features padded sides and bottom, and a storage pouch for accessories
- Nylon soft black carrying case with shoulder strap
- Also includes a storage pouch to keep your accessories secure
The N2738A Soft carrying case is the perfect way to travel with or store your 1000 X-Series oscilloscope. The case is designed for convenience with padded sides and bottom, as well as a storage pouch for your probes and additional accessories.
Soft Carrying Case
Transport your InfiniiVision series oscilloscope in this padded case with additional storage for probes and accessories.
Transport your InfiniiVision series oscilloscope in this padded case with additional storage for probes and accessories.
Soft Carrying Case
N2733B
Transport your InfiniiVision series oscilloscope in this padded case with additional storage for probes and accessories.
The N2733B Soft carrying case is the perfect way to travel with or store your InfiniiVision Series oscilloscope. The case is designed for convenience with padded sides and bottom, as well as a storage pouch for your probes and additional accessories.
E-Series Average Power Sensor
The E9304A power sensor measures average power over the frequency range 9 kHz to 6 GHz and power range -60 to +20 dBm. This sensor is ideal for very low frequency (VLF) power measurements.
The E9304A power sensor measures average power over the frequency range 9 kHz to 6 GHz and power range -60 to +20 dBm. This sensor is ideal for very low frequency (VLF) power measurements.
E-Series Average Power Sensor
E9304A
The E9304A power sensor measures average power over the frequency range 9 kHz to 6 GHz and power range -60 to +20 dBm. This sensor is ideal for very low frequency (VLF) power measurements.
- Low frequency coverage of 9 kHz to 6 GHz for EMC/EMI test applications such as the radiated immunity test (IEC61000-4-3)
- High sensitivity of -60 to +20 dBm and fast measurement speed to reduce the time taken to calibrate radiated field uniformity and EMC/EMI test receivers
- Measure transmitter power and receiver sensitivity at Very Low Frequency (VLF) to microwave frequencies
- Special option available for frequencies up to 18 GHz
- Compatible with EPM (N1913B/14B, N1913A/14A, E4418B/19B), EPM-P (E4416A/17A) and P-series (N1911A/12A) power meters
E-Series Average Power Sensor
The E9301B power sensor measures average power over the frequency range 10 MHz to 6 GHz and power range -30 to +44 dBm (74 dB dynamic range).
The E9301B power sensor measures average power over the frequency range 10 MHz to 6 GHz and power range -30 to +44 dBm (74 dB dynamic range).
E-Series Average Power Sensor
E9301B
The E9301B power sensor measures average power over the frequency range 10 MHz to 6 GHz and power range -30 to +44 dBm (74 dB dynamic range).
- Frequency range of 10 MHz to 6 GHz coverage for Wireless Comms formats
- Wide dynamic range power measurements from -30 to +44 dBm
- Measure the average power of all modulation formats
- Low SWR for reducing mismatch uncertainty
- Calibration factors, linearity, and temperature compensation data are stored in EEPROM
- Compatible with EPM (N1913B/14B, N1913A/14A, E4418B/19B), EPM-P (E4416A/17A) and P-series (N1911A/12A) power meters
Thermocouple Power Sensors
N8488A power sensor has the widest frequency range among N8480 power sensors offering from Keysight.
N8488A power sensor has the widest frequency range among N8480 power sensors offering from Keysight.
Thermocouple Power Sensors
N8488A
N8488A power sensor has the widest frequency range among N8480 power sensors offering from Keysight.
- Wide frequency range from 10 MHz to 67 GHz (Not warranted spec from 67 to 70 GHz)
- Wide dynamic range from -35 to +20 dBm
- EEPROM to store cal factors eliminates manual entry
- Power linearity of less than 1%, excellent SWR of mismatch uncertainty, and highly accurate power repeatability
- Accurate calibration and traceability to the US National Institute of Standards and Technology (NIST)
- SCPI codes compatibility
- Compatible with EPM (N1913/14B, N1913/14A & E4418/19B), EPM-P (E4416/17A), P-Series (N1911/12A & N8262A) power meters
Thermocouple Power Sensors
N8480 Series Power Sensors are the replacement solutions for 8480 Series Power Sensors.
N8480 Series Power Sensors are the replacement solutions for 8480 Series Power Sensors.
Thermocouple Power Sensors
N8486AR
N8480 Series Power Sensors are the replacement solutions for 8480 Series Power Sensors.
- Wide frequency range from 26.5 to 40 GHz
- Wide dynamic range from -35 to +20 dBm
- EEPROM to store cal factors eliminates manual entry
- Power linearity of less than 1%, excellent SWR of mismatch uncertainty, and highly accurate power repeatability
- Accurate calibration and traceability to the US National Institute of Standards and Technology (NIST)
- SCPI codes compatible with 8480 series (option CFT)
Note: Option CFT is available to replace legacy 8480 Series power sensors intended for cal factor manual entry and SCPI compatibility. Option CFT is not compatible with 43x and other obsolete power meters.
- SCPI codes compatible with E-Series sensor (standard option)
- Compatible with EPM (N1913/14B, N1913/14A & E4418/19B), EPM-P (E4416/17A), P-Series (N1911/12A & N8262A) power meters
Note: All N8480 series power sensors are incompatible with the Keysight 43x, E1416A, 5314x microwave counters, and E7495x base station test sets.
Thermocouple Power Sensors
N8480 Series Power Sensors are the replacement solutions for 8480 Series Power Sensors.
N8480 Series Power Sensors are the replacement solutions for 8480 Series Power Sensors.
Thermocouple Power Sensors
N8486AQ
N8480 Series Power Sensors are the replacement solutions for 8480 Series Power Sensors.
- Wide frequency range from 33 to 50 GHz
- Wide dynamic range from -35 to +20 dBm
- EEPROM to store cal factors eliminates manual entry
- Power linearity of less than 1%, excellent SWR of mismatch uncertainty, and highly accurate power repeatability
- Accurate calibration and traceability to the US National Institute of Standards and Technology (NIST)
- SCPI codes compatible with 8480 series (option CFT)
Note: Option CFT is available to replace legacy 8480 Series power sensors intended for cal factor manual entry and SCPI compatibility. Option CFT is not compatible with 43x and other obsolete power meters.
- SCPI codes compatible with E-Series sensor (standard option)
- Compatible with EPM (N1913/14B, N1913/14A & E4418/19B), EPM-P (E4416/17A), P-Series (N1911/12A & N8262A) power meters
Note: All N8480 series power sensors are incompatible with the Keysight 43x, E1416A, 5314x microwave counters, and E7495x base station test sets.
Thermocouple Power Sensors
N8480 Series Power Sensors are the replacement solutions for 8480 Series Power Sensors.
N8480 Series Power Sensors are the replacement solutions for 8480 Series Power Sensors.
Thermocouple Power Sensors
N8485A
N8480 Series Power Sensors are the replacement solutions for 8480 Series Power Sensors.
- Wide frequency range from 10 MHz to 26.5 GHz
- Wide dynamic range from -35 to +20 dBm
- EEPROM to store cal factors eliminates manual entry
- Power linearity of less than 1%, excellent SWR of mismatch uncertainty, and highly accurate power repeatability
- Accurate calibration and traceability to the US National Institute of Standards and Technology (NIST)
- SCPI codes compatible with 8480 series (option CFT)
Note: Option CFT is available to replace legacy 8480 Series power sensors intended for cal factor manual entry and SCPI compatibility. Option CFT is not compatible with 43x and other obsolete power meters.
- SCPI codes compatible with E-Series sensor (standard option)
- Compatible with EPM (N1913/14B, N1913/14A & E4418/19B), EPM-P (E4416/17A), P-Series (N1911/12A & N8262A) power meters
Note: All N8480 series power sensors are incompatible with the Keysight 43x, E1416A, 5314x microwave counters, and E7495x base station test sets.
Thermocouple Power Sensors
N8480 Series Power Sensors are the replacement solutions for 8480 Series Power Sensors.
N8480 Series Power Sensors are the replacement solutions for 8480 Series Power Sensors.
Thermocouple Power Sensors
N8481A
N8480 Series Power Sensors are the replacement solutions for 8480 Series Power Sensors.
- Wide frequency range from 10 MHz to 18 GHz
- Wide dynamic range from -35 to +20 dBm
- EEPROM to store cal factors eliminates manual entry
- Power linearity of less than 1%, excellent SWR of mismatch uncertainty, and highly accurate power repeatability
- Accurate calibration and traceability to the US National Institute of Standards and Technology (NIST)
- SCPI codes compatible with 8480 series (option CFT)
Note: Option CFT is available to replace legacy 8480 Series power sensors intended for cal factor manual entry and SCPI compatibility. Option CFT is not compatible with 43x and other obsolete power meters.
- SCPI codes compatible with E-Series sensor (standard option)
- Compatible with EPM (N1913/14B, N1913/14A & E4418/19B), EPM-P (E4416/17A), P-Series (N1911/12A & N8262A) power meters
Note: All N8480 series power sensors are incompatible with the Keysight 43x, E1416A, 5314x microwave counters, and E7495x base station test sets.
