お探しのページはこちらでしょうか. その他の検索結果:

主な特長

帯域幅

  • 3.5 GHz

レンジ

  • ダイナミックレンジ：±2.5 V
  • DCオフセットレンジ：±12 V（プローブオフセット使用時）
  • 最大入力電圧：30 V

入力インピーダンス

  • 差動入力抵抗：50 kΩ
  • 差動入力キャパシタンス：0.27～0.34 pF
  • シングルエンド入力抵抗：25 kΩ
  • シングルエンド入力キャパシタンス：0.44～0.67 pF

エンベディッドデザインで高速差動／シングルエンドプロービングが必要な場合は、Infiniium 2.5～3 GHzオシロスコープを完全に補完するInfiniiMax 3.5 GHz 1131B差動プローブアンプが最適です。このプローブアンプの極めて低い入力キャパシタンス、フラットな周波数応答、抵抗プローブチップ技術は、DUTに対して極めて小さな負荷を実現し優れた信号忠実度を提供します。InfiniiMax 1130B～34Bシリーズは、プローブヘッドやアクセサリの豊富なラインナップとの組み合わせにより、幅広い実環境のアプリケーションをサポートします。これらのアクセサリは最も厳しいメカニカルアクセス要件を満たすことができます。

InfiniiMax 1130B～34Bで使用できる他のプローブ・ヘッド・アクセサリを表示するには、InfiniiMaxプローブアクセサリのページを参照してください。

機能拡張

アクセサリ
すべてのアクセサリを表示

注目のリソース

Application Notes 2017.11.30

Improving Performance in Active Oscilloscope Probes

Improving Performance in Active Oscilloscope Probes

Keysight’s new InfiniiMax high bandwidth scope probe provides interchangeable probe heads that are optimized for a variety of high-bandwidth uses.

2017.11.30

Application Notes 2017.11.30

InfiniiMax Oscilloscope Probes Impact on (ROHS) Lead–Free Compliance

InfiniiMax Oscilloscope Probes Impact on (ROHS) Lead–Free Compliance

Some Keysight InfiniiMax oscilloscope probe heads are intended for soldering to the device under test. Read about the impact to lead-free (ROHS) Compliance.

2017.11.30

Application Notes 2017.11.30

Extending the Operating Range of InfiniiMax Probes

Extending the Operating Range of InfiniiMax Probes

Learn how to extend the operating range of Keysight InfiniiMax probes in voltage, temperature, and distance (reach) between probe amplifiers and heads.

2017.11.30

Application Notes 2024.01.23

Oscilloscope Probing for High-speed Signals

Oscilloscope Probing for High-speed Signals

The probe is the dominant factor in determining the noise floor and response of your measurement system. Learn more about this and probe loading effects.

2024.01.23

技術概要 2016.06.08

オシロスコープ用プローブ／アクセサリ

オシロスコープ用プローブ／アクセサリ

To get the most out of your oscilloscope, you need the right probes and accessories for your particular applications.

2016.06.08

Application Notes 2018.06.20

Bandwidth Boosting Techniques for the Infiniimax Probe Amp and Probe Head

Bandwidth Boosting Techniques for the Infiniimax Probe Amp and Probe Head

Keysight InfiniiMax differential probes are DSP corrected to have a flat magnitude and phase response to provide the highest possible accuracy. The bandwidth chosen to correct to is typically around 3dB non-corrected bandwidth. Usually, extending the bandwidth much beyond that point will increase the noise floor, and if pushed even further, can cause unrealistic noise artifacts. This application note presents the techniques used to extend the bandwidth performance of the InfiniiMax 1169A/B and the N5381A/B solder-in head using the PrecisionProbe application on Infiniium realtime oscilloscope.

2018.06.20

Application Notes 2023.03.12

Probe Soldering Guidelines for Keysight InfiniiMax Probes

Probe Soldering Guidelines for Keysight InfiniiMax Probes

There are various ways to connect test instrumentation probes to devices under test (DUTs). One such method is soldering, which provides a reliable connection and minimizes parasitic probing effects by keeping wire lengths and connections as short as possible. Many of Keysight’s high performance oscilloscope probes utilize soldered connections. As probes and devices continue to shrink, using the correct tools and soldering skills becomes even more critical in order to avoid damage and connectivity issues. This guide provides helpful tips, recommended tools, and techniques specific to Keysight probes to help test engineers make the most out of their soldered-in probes and connections.

2023.03.12

Oscilloscope Probes Selection Guide

Oscilloscope Probes Selection Guide

Keysight offers a broad range of voltage, current, and optical probing solutions for InfiniiVision and Infiniium Series oscilloscopes.
すべてのリソースを表示

すべてのリソースを表示

ご要望、ご質問はございませんか。

お問い合わせはこちら