M9099T 波形產生應用軟體

The M9099 Waveform Creator is a modular software application focused on easy development of complex baseband and vector signals used in the validation and test of digital communications products. Built around a “drag and drop” graphical user interface, Waveform Creator allows quick development of multi-format, multi-track waveforms with waveform segments displaced in frequency and time.

Waveform Creator 3.2 adds the following key features:

• Carrier Summing Enhancements in Track Alignment.
• Additional Marker types
  • Period/Length Pair
  • ALC from Highest Power Track
  • Auto Generated RF Blanking
• “ALC On/Off” and marker routing setting for “RF Blanking” and “ALC Hold” for MXG/ESG/EXG output device.
• FSK filter for Digital Modulation 2-FSK/4-FSK/8-FSK/16-FSK.
• Transmit OSR” and Granularity Options for M8190A.
• Ability to download “Specified Segment IDs” and “Waveform Caching” support to the M8190A.
• SCPI commands for creating user defined Pre-Correction for M8190A.
• Pre-Correction when using the “File” Output Device.

The M9099 Waveform Creator is a modular software application focused on easy development of complex baseband and vector signals used in the validation and test of digital communications products. Built around a “drag and drop” graphical user interface, Waveform Creator allows quick development of multi-format, multi-track waveforms with waveform segments displaced in frequency and time.

Waveform Creator 3.1 adds the following key features:

• Added Digital Modulation support for APCO25 Phase1 - C4FM, Phase1 - CQPSK, Tetra-1 and ARIB T98/61/102
• Updated DOCSIS 3.1 upstream signal generation capabilities.
• Added QAM 2048 and 4096 in Digital Modulation plug-in
• Added Dual Sine Wave to Basic Waveform plug-in
• Expanded lower waveform frequency limit from 100 kHz to 1 Hz
• Added “Sequencing Mode” and “Dynamic Control On” to M8190A dynamic sequencer
• Added support for Keysight 33522 & 33600 series AWG

The M9099 Waveform Creator is a modular software application focused on easy development of complex baseband and vector signals used in the validation and test of digital communications products. Built around a “drag and drop” graphical user interface, Waveform Creator allows quick development of multi-format, multi-track waveforms with waveform segments displaced in frequency and time.

Waveform Creator 3.1 adds the following key features:

• Added QAM 2048 and 4096 in Digital Modulation plug-in
• Added prefix symbols for upstream DOCSIS
• Added new payload formats (From Text File: 1 bit per line and Sequential 1/0 data )
• Changed default FSK Frequency Deviation from 10 kHz to 8 MHz
• Support downloading encrypted waveforms to M8190A (remote and direct)
• Updated DOCSIS to support DOCSIS Configuration Wizard v1.4.7.0
• Added support for N824xA DDS mode
• Added Dual Sine Wave to Basic Waveform plug-in
• Expanded lower waveform frequency limit from 100 kHz to 1 Hz
• Added “ARB ON” and “PlayARB n” to match M9381A SFP
• Added “Sequencing Mode” and “Dynamic Control On” to M8190A dynamic sequencer
• Support Single Channel waveform download to M8190A
• Added support for the following Keysight products:
  • 33522 Series AWG
  • 33600 Series AWG

The M9099 Waveform Creator is a modular software application focused on easy development of complex baseband and vector signals used in the validation and test of digital communications products. Built around a “drag and drop” graphical user interface, Waveform Creator allows quick development of multi-format, multi-track waveforms with waveform segments displaced in frequency and time. Its modularity supports multiple waveform types and VSG/AWG instruments to be “plugged in”, supporting expansion to include both current & future waveform types and instruments.

Waveform Creator 3.0 provides the following key features:

• Optional generation of DOCSIS 3.1 downstream and upstream signals.
• Optional waveform creation plug-in for basic digital modulation.
• Optional waveform creation plug-in for SystemVue simulation models.
• Other Standard waveform plug-ins for general-purpose waveform creation.
• Importing of waveform data from CSV, LabVIEW CSV, HDF, BIN,
• M8190A DUC IQBINFile, or Signal Studio's WFM file type.
• Flexible waveform creation and generation capability for the following Keysight products:
  • M9381A PXI VSG,
  • N5182A/B MXG, N5172B EXG, and E4438C ESG,
  • M933xA AWG, N824xA AWG, and
  • M8195A AWG, M8190A AWG and 81180A/B AWG
• Output plug-in for writing unencrypted waveform files (CSV, MAT,BIN,M8190A
• DUC IQBIN, M9381A native files, and WFM).
• User extendable functionality such as creating your own waveform input plug-ins.
• SCPI remote control for test automation.

The M9099 Waveform Creator is a modular software application focused on easy development of complex baseband and vector signals used in the validation and test of digital communications products. Built around a “drag and drop” graphical user interface, Waveform Creator allows quick development of multi-format, multi-track waveforms with waveform segments displaced in frequency and time. Its modularity supports multiple waveform types and VSG/AWG instruments to be “plugged in”, supporting expansion to include both current & future waveform types and instruments.

The M9099 Waveform Creator is a modular software application focused on easy development of complex baseband and vector signals used in the validation and test of digital communications products. Built around a “drag and drop” graphical user interface, Waveform Creator allows quick development of multi-format, multi-track waveforms with waveform segments displaced in frequency and time. Its modularity supports multiple waveform types and VSG/AWG instruments to be “plugged in”, supporting expansion to include both current & future waveform types and instruments.