Get peace of mind only Keysight can offer. With KeysightCare Assured and manufacturer calibration.

*If the unit is not yet calibrated (see listing), a calibration is required to purchase a KeysightCare plan.

• Frequency range of 50 MHz to 18 GHz
• Wide dynamic range of -30 to +20 dBm (peak/gated), -45 dBm to 20 dBm (average only mode)
• 30 MHz video bandwidth and single shot real time capture at 80 Msample/sec per second
• Internal zeroing & calibration
• High measurement speed of up to 25,000 readings/second (free run/fast buffer mode)

Perform measurements direct from your PC

The U2020 X-Series is supported by the Keysight BenchVue software. BenchVue makes it easy to control your power meter to log data and visualize measurements in a wide array of display options without any programming.

Simply connect the sensor to your PC installed BenchVue BV0007B Power Meter/Sensor Control and Analysis app to perform complex pulse analysis and standard average power measurement.

Built in external trigger in and out

External trigger will enable accurate trigger of small signals close to the signal noise floor. With the built-in trigger in/out connection on the Keysight U2020 X-series USB power sensors; you can connect an external trigger signal from a signal source or the device under test directly to the USB sensor through a standard BNC to SMB cable.

仅包含图片中显示的配件。

其他未列出的配件可以单独购买，请在索取报价的留言栏中注明您感兴趣的其他配件或支持服务。

如需单独订购配件或购买仪器后订购配件，请联系您当地的是德科技办事处或合作伙伴。或在此处查看我们的在线商店，确认是否在您的国家/地区有出售。