Choose a country or area to see content specific to your location
What are you looking for?
-
-
3D Interconnect Designer
3D Interconnect Designer provides a flexible modeling and optimization environment for any advanced interconnect structure, including chiplets, stacked die, packages, and PCBs.
-
Save up to 50% on an XR8 Oscilloscope
Get faster digital validation for less with a trade-in.
-
Discover Keysight AI Data Center Builder
Emulate every part of your data center infrastructure. Emulate Anything. Optimize Everything.
-
Accelerate Signal Analysis with X-Series Measurement Applications
Use 25+ X-Series applications to analyze, demodulate, and troubleshoot signals across wireless, aerospace/defense, EMI, and phase noise.
-
Introducing AI-Enhanced Packet Brokers
With extra memory and storage, these enhanced NPBs run Keysight's AI security and performance monitoring software and AI stack.
-
Precision In-Circuit Testing for Production
Achieve fast, accurate board-level testing with robust inline and offline ICT designed for modern manufacturing.
-
Accelerate Your Innovation Engine
Explore curated support plans, prioritized to keep you innovating at speed.
-
448 Gb/s Waveform Generation
Achieve 200+ Gbaud multi-level modulated signals with high-speed AWGs for digital and optical standards.
-
Stream 120 MHz I/Q Data to Your Laptop in the FieldPinpoint interference with post-processing spectrum management software in the lab.
Find the Right ATE Power SolutionUse this selector tool to quickly identify the best power supply for your aerospace and defense ATE requirements.
-
- Solutions
-
Explore engineer-authored content and a vast knowledge base with thousands of learning opportunities.
FeaturedKeysight Learn offers immersive content on topics of interest, including solutions, blogs, events, and more.
- Buy
-
Quick access to support related self-help tasks.
Additional content to support your product needs.
Do more with Keysight ServicesExplore services to accelerate every step of your innovation journey.
Accessories
Explore the complete portfolio of Keysight accessories designed to complement and extend your instruments. Use the filters below to quickly find compatible accessories such as modules, cables, adapters, and other system components to configure, expand, and optimize your test system for your specific measurement needs.
Showing 12 of 1580
-
73
-
693
No Filter available
InfiniiMax Ultra Probe Amplifier, 25 GHz
Best probes for measuring signals found in the latest DDR5 and MIPI standards.
Best probes for measuring signals found in the latest DDR5 and MIPI standards.
InfiniiMax Ultra Probe Amplifier, 25 GHz
MX0025A
Best probes for measuring signals found in the latest DDR5 and MIPI standards.
- Test and validate high-speed technologies such as DDR5 / MIPI with the 25 GHz probe amplifier (AP2).
- Experience the highest input impedance in midband frequencies for low-energy probing.
- Boost test margins with the lowest signal degradation.
- Probe small devices with the super-flexible micro probe head or choose from the widest variety of compatible probe heads for your unique application.
- Measure differential, single-ended, and common mode signals with a single probe tip.
- Use with Infiniium UXR-, 90000 X-, Q-, V-, and Z-Series oscilloscopes.
Keysight’s MX0025A InfiniiMax Ultra Series probe amplifier improves usability because you can measure differential, single-ended, and common mode signals with a single probe tip.
When you use a probe to connect your signal to your oscilloscope, it becomes part of the circuit affecting your test. Your probe may be hiding signal details, loading down your signal, or distorting it. InfiniiMax Ultra Series probes have the lowest loading for minimal impact to your circuit. Boost your test margins and gain measurement confidence with their unprecedented accuracy. Ensure your entire measurement system is helping you see the truest representation of your signal.
These probes have the lowest noise and capacitive loading and the lowest loading across more frequencies due to their RC high impedance profile. The InfiniiMax Ultra Series supports InfiniiMode and has a user-defined AC calibration mode, a wider input voltage range, more accuracy with unique S-parameter characterization, lower capacitive loading, a wider input voltage range, micro / socketed probe heads for smaller density probing, and more bandwidths. The InfiniiMax Ultra Series has an RC input impedance architecture with the lowest loading and least signal distortion across the widest frequency range.
InfiniiMax Ultra probes have three attenuation ranges — 1:1, 4:1, and 8:1 — giving you superior noise performance and large voltage ranges, all while maintaining maximum bandwidth. The input range automatically configures depending on the size of the input signal and vertical scale of your oscilloscope.
Choose from the three flexible input dynamic ranges from 600 mVpp at 1:1, 2.5 Vpp at 4:1, and 5 Vpp at 8:1. Clearly see and know when your design is satisfactory, keep up with standards, easily probe small devices, and reduce test complexity with the InfiniiMax Ultra Series probes.
4-in-1 OSLT Mechanical Calibration Kit, DC to 18 GHz, Type-N (m) 50 ohm
85518A 4-in-1 OSLT mechanical calibration kit, DC to 18 GHz, Type-N male (m) 50 ohm for non-insertable devices.
85518A 4-in-1 OSLT mechanical calibration kit, DC to 18 GHz, Type-N male (m) 50 ohm for non-insertable devices.
4-in-1 OSLT Mechanical Calibration Kit, DC to 18 GHz, Type-N (m) 50 ohm
85518A
85518A 4-in-1 OSLT mechanical calibration kit, DC to 18 GHz, Type-N male (m) 50 ohm for non-insertable devices.
- Type-N (m), 50 ohm, open, short, load, and through
- DC to 18 GHz
- Open phase error: 0 to 6 GHz ≤ 2.0°, 6 to 9 GHz ≤ 3.0°, 9 to 18 GHz ≤ 4.0°
- Short phase error: 0 to 6 GHz ≤ 1.5°, 6 to 9 GHz ≤ 2.5°,9 to 18 GHz ≤ 3.0°
- Load return loss: 0 to 6 GHz ≥ 42 dB, 6 to 9 GHz, ≥ 35 dB, 9 to 18 GHz, ≥ 32 dB
- Dimensions: H x W x D ~ 106 x 72 x 22 mm
The 85518A 4-in-1 mechanical calibration module combines an open, short, load, and through in a compact unit. The product is small, easy to handle, and light weight. The through allows users to easily calibrate non-insertable devices, such as a cable or filter with male-male connectors. During the "thru" part of the calibration, the 85518A through can be used.
For more information about calibration kits, please visit Mechanical and Electronic Calibration Kits.
4-In-1 OSLT Mechanical Calibration Kit, DC To 18 GHz, Type-N (f) 50 ohm
85519A 4-in-1 OSLT mechanical calibration kit, DC to 18 GHz, Type-N female (f) 50 ohm for non-insertable devices.
85519A 4-in-1 OSLT mechanical calibration kit, DC to 18 GHz, Type-N female (f) 50 ohm for non-insertable devices.
4-In-1 OSLT Mechanical Calibration Kit, DC To 18 GHz, Type-N (f) 50 ohm
85519A
85519A 4-in-1 OSLT mechanical calibration kit, DC to 18 GHz, Type-N female (f) 50 ohm for non-insertable devices.
- Type-N (f), 50 ohm, open, short, load, and through
- DC to 18 GHz
- Open phase error: 0 to 6 GHz ≤ 2.0°, 6 to 9 GHz ≤ 3.0°, 9 to 18 GHz ≤ 4.0°
- Short phase error: 0 to 6 GHz ≤ 1.5°, 6 to 9 GHz ≤ 2.5°,9 to 18 GHz ≤ 3.0°
- Load return loss: 0 to 6 GHz ≥ 42 dB, 6 to 9 GHz, ≥ 35 dB, 9 to 18 GHz, ≥ 32 dB
- Dimensions: H x W x D ~ 121 x 89 x 22 mm
The 85519A 4-in-1 mechanical calibration module combines an open, short, load, and through in a compact unit. The product is small, easy to handle, and light weight. The through allows users to easily calibrate non-insertable devices, such as a cable or filter with female-female connectors. During the "thru" part of the calibration, the 85519A through can be used.
For more information about calibration kits, please visit Mechanical and Electronic Calibration Kits.
110 GHz Frequency Extender
N5293AX53 frequency extender expands PNA/PNA-X coverage to 110 GHz in a compact, lightweight module.
N5293AX53 frequency extender expands PNA/PNA-X coverage to 110 GHz in a compact, lightweight module.
110 GHz Frequency Extender
N5293AX53
N5293AX53 frequency extender expands PNA/PNA-X coverage to 110 GHz in a compact, lightweight module.
- Wide frequency range from 900 Hz to 110 GHz, with PNA/PNA-X’s low frequency extension (LFE) option.
- Built-in bias tee.
- Built-in 1.8 m interface cable for connection to N5292A controller.
- Typical maximum power of 0 dBm from 90 GHz to 110 GHz.
- Typical sweep range from -60 dBm to the maximum power.
- Typical noise floor of -120 dBm to 26.5 GHz, -110 dBm to 110 GHz.
Broadband frequency extension module designed for use with Keysight’s new PNA/PNA-X based millimeter wave solutions.
The N5293AX53 modules are compact lightweight modules designed to interface to the N5292A test set controller that is driven with a PNA/PNA-X B model vector network analyzer.
The modules allow users to extend the frequency coverage of a base PNA/PNA-X to cover a frequency range of 900 Hz to 110 GHz.
For more information about cable and accessories for use with network analyzers, please visit Network Analyzer Accessories.
120 GHz Frequency Extender
N5295AX01 Frequency Extender extends the frequency coverage with wide frequency range from 10 MHz to 120 GHz (no bias tee) for use with PNA/PNA-X based solutions.
N5295AX01 Frequency Extender extends the frequency coverage with wide frequency range from 10 MHz to 120 GHz (no bias tee) for use with PNA/PNA-X based solutions.
120 GHz Frequency Extender
N5295AX01
N5295AX01 Frequency Extender extends the frequency coverage with wide frequency range from 10 MHz to 120 GHz (no bias tee) for use with PNA/PNA-X based solutions.
- Wide frequency range from 10 MHz to 120 GHz (no bias tee).
- Built-in 1.2 m interface cable for connection to N5292A controller.
- Typical maximum power of +8 dBm to 60 GHz, +5 dBm to 110 GHz, +4 dBm to 120 GHz.
- Typical sweep range from -60 dBm to the maximum power.
- Typical noise floor of -120 dBm to 26.5 GHz, -110 dBm to 110 GHz, -100 dBm to 120 GHz.
- Typical performance to 125 GHz, operational over-range frequency 130 GHz.
Broadband frequency extension module designed for use with Keysight’s new PNA/PNA-X based millimeter wave solutions.
The N5295AX01 modules are compact lightweight modules designed to interface to the N5292A test set controller that is driven with a PNA/PNA-X B model vector network analyzer.
The modules allow users to extend the frequency coverage of a base PNA/PNA-X to cover a frequency range of 10 MHz to 120 GHz.
For more information about cable and accessories for use with network analyzers, please visit Network Analyzer Accessories.
DC Block, 700 kHz to 67 GHz
N9398G DC Block passes AC signals from 700 kHz to 67 GHz while blocking DC voltage and current components.
N9398G DC Block passes AC signals from 700 kHz to 67 GHz while blocking DC voltage and current components.
DC Block, 700 kHz to 67 GHz
N9398G
N9398G DC Block passes AC signals from 700 kHz to 67 GHz while blocking DC voltage and current components.
The Keysight N9398G DC block offers a new level of DC blocking with performance specified from 700 kHz to 67 GHz. This DC block features a broad frequency range, excellent return loss, very low insertion loss and excellent temperature stability.
- Frequency range 700 kHz to 67 GHz
- Low insertion loss < 1.0 dB
- 16 V maximum DC working voltage
- 1.85 mm precision coaxial connectors
DC Block, 50 kHz To 26.5 GHz
N9398C DC Block passes AC signals from 50 kHz to 26.5 GHz while blocking DC voltage and current components.
N9398C DC Block passes AC signals from 50 kHz to 26.5 GHz while blocking DC voltage and current components.
DC Block, 50 kHz To 26.5 GHz
N9398C
N9398C DC Block passes AC signals from 50 kHz to 26.5 GHz while blocking DC voltage and current components.
The Keysight N9398C DC block offers a new level of DC blocking with performance specified from 50 kHz to 26.5 GHz. This DC block features a broad frequency range, excellent return loss, very low insertion loss and excellent temperature stability.
- Frequency range 50 kHz to 26.5 GHz
- Low insertion loss < 0.9 dB
- 16 V maximum DC working voltage
- 3.5 mm precision coaxial connectors
Learn more about Keysight DC Blocks
DC Block, 700 kHz to 50 GHz
N9399F DC Block passes AC signals from 700 kHz to 50 GHz while blocking DC voltage and current components.
N9399F DC Block passes AC signals from 700 kHz to 50 GHz while blocking DC voltage and current components.
DC Block, 700 kHz to 50 GHz
N9399F
N9399F DC Block passes AC signals from 700 kHz to 50 GHz while blocking DC voltage and current components.
The Keysight N9399F DC block offers a new level of DC blocking with performance specified from 700 kHz to 50 GHz. This DC block features a broad frequency range, excellent return loss, very low insertion loss and excellent temperature stability.
- Frequency range 700 kHz to 50 GHz
- Low insertion loss < 1.2 dB
- 50 V maximum DC working voltage
- 2.4 mm precision coaxial connectors
Learn more about Keysight DC Blocks
DC Block, 700 kHz to 26.5 GHz
N9399C DC Block passes AC signals from 700 kHz to 26.5 GHz while blocking DC voltage and current components.
N9399C DC Block passes AC signals from 700 kHz to 26.5 GHz while blocking DC voltage and current components.
DC Block, 700 kHz to 26.5 GHz
N9399C
N9399C DC Block passes AC signals from 700 kHz to 26.5 GHz while blocking DC voltage and current components.
The Keysight N9399C DC block offers a new level of DC blocking with performance specified from 700 kHz to 26.5 GHz. This DC block features a broad frequency range, excellent return loss, very low insertion loss and excellent temperature stability.
- Frequency range 700 kHz to 26.5 GHz
- Low insertion loss < 1.2 dB
- 50 V maximum DC working voltage
- 3.5 mm precision coaxial connectors
Learn more about Keysight DC Blocks
DC Block, 50 kHz To 50 GHz
N9398F DC Block passes AC signals from 50 kHz to 50 GHz while blocking DC voltage and current components.
N9398F DC Block passes AC signals from 50 kHz to 50 GHz while blocking DC voltage and current components.
DC Block, 50 kHz To 50 GHz
N9398F
N9398F DC Block passes AC signals from 50 kHz to 50 GHz while blocking DC voltage and current components.
The Keysight N9398F DC block offers a new level of DC blocking with performance specified from 50 kHz to 50 GHz. This DC block features a broad frequency range, excellent return loss, very low insertion loss and excellent temperature stability.
- Frequency range 50 kHz to 50 GHz
- Low insertion loss < 1.0 dB
- 16 V maximum DC working voltage
- 2.4 mm precision coaxial connectors
Learn more about Keysight DC Blocks
Cable, 4 m
BT2182A 4-metre DB37(m) to DB37(m) cable for 16 measurement channels; connects to BT2152B rear panel DB37(f).
BT2182A 4-metre DB37(m) to DB37(m) cable for 16 measurement channels; connects to BT2152B rear panel DB37(f).
Cable, 4 m
BT2182A
BT2182A 4-metre DB37(m) to DB37(m) cable for 16 measurement channels; connects to BT2152B rear panel DB37(f).
Keysight's BT2182A cable (4 m) are for 16 measurement channels to connects the DB37(f) on the Keysight BT2152B rear panel. The cable has 18 pairs of twisted wires with shield and braided shield around bundle of twisted pairs; only 16 pairs are necessary for current measurement with the BT2152B. The braid connects to the connector housing on both ends of cable; connector pins are machined.
Learn more about Keysight's self-discharge measurement solutions.
Cable, 2 m
BT2181A 2-metre DB37(m) to DB37(m) cable for 16 measurement channels; connects to BT2152B rear panel DB37(f).
BT2181A 2-metre DB37(m) to DB37(m) cable for 16 measurement channels; connects to BT2152B rear panel DB37(f).
Cable, 2 m
BT2181A
BT2181A 2-metre DB37(m) to DB37(m) cable for 16 measurement channels; connects to BT2152B rear panel DB37(f).
The Keysight BT2181A cable (2 m) for 16 measurement channels connects to the DB37(f) on Keysight's BT2152B rear panel. The cable has 18 pairs of twisted wires with shield and braided shield around bundle of twisted pairs; use the 16 pairs for current measurement with the BT2152B. Braid connects to the connector housing on both ends of the cable with machined connector pins.
Learn more about Keysight self-discharge measurement solutions.
