This video discusses how the new N9042B UXA X-Series signal analyzer provides the industry's widest analysis bandwidth and deepest dynamic range to help customers solve their difficult mmWave challenges in cellular communications applications. This modal can be closed by pressing the Escape key or activating the close button.

This video discusses how the new N9042B UXA X-Series signal analyzer provides the industry's widest analysis bandwidth and deepest dynamic range to help customers solve their difficult mmWave challenges in cellular communications applications. This modal can be closed by pressing the Escape key or activating the close button.

Demonstration of how X-Series Signal Analyzer can be used to measure RF Power This modal can be closed by pressing the Escape key or activating the close button.

This is a modal window. This modal can be closed by pressing the Escape key or activating the close button.

In this video, Dr. Joel Dunsmore demonstrates Keysight's Channel Quality/Group Delay X-Series measurement application. Dr. Dunsmore uses the application to measure the gain and group delay of a wideband filter using a VXG signal generator to generate the multi-tone signals and then uses a UXA signal analyzer as a receiver to determine the gain, phase and delay from the measured multi-tone signal. Dr. Dunsmore also compares the measurement results with the traditional method using a PNA network analyzer and demonstrates that the results are closely matched. This modal can be closed by pressing the Escape key or activating the close button.

Watch this demo to learn how to test your satellite component DVB-S2X signal performance up to 55 GHz on the PXA signal analyzer. Measurements include swept signal analysis, error vector magnitude (EVM), noise power ratio (NPR), and up to 2 GHz bandwidth real-time spectrum analysis (RTSA). This modal can be closed by pressing the Escape key or activating the close button.

This video introduces the widest real-time signal analysis (RTSA) bandwidth in industry (2 GHz), supported by N9042B UXA X-Series signal analyzer. This modal can be closed by pressing the Escape key or activating the close button.

Power amplifier, or PA, is a core component in wireless communication devices such as mobile phones or base stations. Many PAs are designed to be used with DPD (Digital Pre-Distortion) so it’s important to measure PA performance under DPD enabled. In this video, we’ll look at the things to know when measuring PA with DPD. This video also demonstrates Keysight new N9055EM0E Power Amplifier measurement application together with VXG and UXA hardware as the integrated PA testing system mainly targeting 5G NR, WLAN, Satellite, or other wideband PA test scenarios. N9055EM0E running inside Keysight X-series Signal Analyzers can connect Keysight Signal Generators for signal generation to make both Pre-DPD and Post-DPD PA measurements as the typical measurements. This modal can be closed by pressing the Escape key or activating the close button.