Können wir Ihnen behilflich sein?

MXG Signal Generator UXA Signal Analyzer PXA Signal Analyzer Eine Lösung finden Technische Unterstützung An einem Training teilnehmen Unsere Teilnahme an Veranstaltungen finden Hochwertige Gebrauchtgeräte KeysightCare Online Kauf

No product matches found - System Exception

Kein Bild verfügbar

Z5623AK12 Distribution Amplifier, 250 MHz to 67 GHz

Produkt Status

Obsolete

Technische Unterstützung

Kalibrierung und Reparatur

Service anfragen

Ersatzprodukt

U3035P Distribution Networks for PSG Signal Generators

Produktdetails anzeigen

Optionen für Kauf oder Mieten

Überblick und Leistungsmerkmale
Upgrades nach dem Kauf
Ressourcen

Überblick und Leistungsmerkmale

HIGHLIGHTS

Features

Enables four Keysight PSG signal generators to operate in a phase locked and coherent mode at a common frequency
Two modes of operation: Distribution Mode and Calibration Mode

Configuration in Distribution Mode

Input and output frequency range: 250 MHz to 67 GHz
Connections: 1 RF input (50 ohm, SMA-f, rear panel) and 4 RF outputs (50 ohm, SMA-f, rear panel)

Configuration in Calibration Mode

Input and output frequency range: 250 MHz to 67 GHz
Connections: 4 RF inputs (50 ohm, SMA-f, rear panel) and 4 RF outputs (50 ohm, SMA-f, rear panel)

The Z5623AK12 distribution amplifier enables up to four Keysight PSG signal generators to operate in a phase locked and coherent mode at a common frequency. It operates in two frequency bands: 250 MHz to 3.2 GHz, and > 3.2 GHz. The upper frequency limit is determined by the frequency range option selected on the PSG (20, 32, 40, 50 or 67 GHz for the E8257D and 20, 32 or 44 GHz for the E8267D).

The distribution amplifier takes an oscillator signal from one “master” signal source, amplifies it and distributes it to multiple other “slave” signal sources. The distribution amplifier has two modes of operation: Distribution Mode and Calibration Mode. The mode of operation is manually selected with a switch on the front panel.

In Distribution Mode, there is 1 RF input, 4 RF outputs. In Calibration Mode, there are 4 RF inputs and 4 RF outputs. Each RF input connects directly to it's own corresponding RF output.