NOTE: Older firmware versions B.05.04.880 through B.03.01.1191 are not compatible with units that were shipped from factory with Firmware Revision B.06.01.953 or higher.

Keysight는 가능한 최신 버전을 사용하는 것을 권장하며, 최신 버전에는 현재 사용 가능한 가장 최신 버그 수정 및 보안 패치가 포함되어 있습니다.
릴리스 날짜 버젼 버전 설명
2024-05-29 B.06.05.1069 RP7950 and RP7960 Series Firmware
릴리스 날짜 버젼
2024-05-29 B.06.05.1069
Version Description
RP7950 and RP7960 Series Firmware

다운로드 방법

  1. Click the Download button.
  2. Save the file to your computer and note the directory where the file is saved. A firmware update installed over the LAN, GPIB, or USB interface is a file with a .upd extension.
  3. Unzip the file to access the .upd file.

설치 방법

  • From the utility directory or Start menu, start the utility (FWUpdate.exe). The utility will prompt you for the location of the .upd file. Follow the additional prompts to complete the installation. The update may take several seconds to complete and will reboot the instrument. After the update is complete, exit the utility.
  • It is not necessary to re-calibrate the instrument following a firmware-update; however, the instrument may need to be re-secured if it was unsecured to perform the update.

라이센스

  • Does Not Require a License

지원 문서

부가 소프트웨어 / 유틸리티

Download

Installs on: Instrument

운영 체제

  • Windows 7
  • Windows 8
  • Windows 10

선결 조건

  • Download and install Firmware Update Utility software

지원되는 계측기

  • RP7951A, RP7952A, RP7953A, RP7961A, RP7962A, RP7963A

다운로드 방법

  1. Click the Download button.
  2. Save the file to your computer and note the directory where the file is saved. A firmware update installed over the LAN, GPIB, or USB interface is a file with a .upd extension.
  3. Unzip the file to access the .upd file.

설치 방법

  • From the utility directory or Start menu, start the utility (FWUpdate.exe). The utility will prompt you for the location of the .upd file. Follow the additional prompts to complete the installation. The update may take several seconds to complete and will reboot the instrument. After the update is complete, exit the utility.
  • It is not necessary to re-calibrate the instrument following a firmware-update; however, the instrument may need to be re-secured if it was unsecured to perform the update.

라이센스

  • Does Not Require a License

지원 문서

부가 소프트웨어 / 유틸리티

Download

Installs on: Instrument

운영 체제

  • Windows 7
  • Windows 8
  • Windows 10

선결 조건

  • Download and install Firmware Update Utility software

지원되는 계측기

  • RP7951A, RP7952A, RP7953A, RP7961A, RP7962A, RP7963A

다운로드 방법

  1. Click the Download button.
  2. Save the file to your computer and note the directory where the file is saved. A firmware update installed over the LAN, GPIB, or USB interface is a file with a .upd extension.
  3. Unzip the file to access the .upd file.

설치 방법

  • From the utility directory or Start menu, start the utility (FWUpdate.exe). The utility will prompt you for the location of the .upd file. Follow the additional prompts to complete the installation. The update may take several seconds to complete and will reboot the instrument. After the update is complete, exit the utility.
  • It is not necessary to re-calibrate the instrument following a firmware-update; however, the instrument may need to be re-secured if it was unsecured to perform the update.

라이센스

  • Does Not Require a License

지원 문서

부가 소프트웨어 / 유틸리티

Download

Installs on: Instrument

운영 체제

  • Windows 7
  • Windows 8
  • Windows 10

선결 조건

  • Download and install Firmware Update Utility software

지원되는 계측기

  • RP7951A, RP7952A, RP7953A, RP7961A, RP7962A, RP7963A

다운로드 방법

  1. Click the Download button.
  2. Save the file to your computer and note the directory where the file is saved. A firmware update installed over the LAN, GPIB, or USB interface is a file with a .upd extension.
  3. Unzip the file to access the .upd file.

설치 방법

  • From the utility directory or Start menu, start the utility (FWUpdate.exe). The utility will prompt you for the location of the .upd file. Follow the additional prompts to complete the installation. The update may take several seconds to complete and will reboot the instrument. After the update is complete, exit the utility.
  • It is not necessary to re-calibrate the instrument following a firmware-update; however, the instrument may need to be re-secured if it was unsecured to perform the update.

라이센스

  • Does Not Require a License

지원 문서

부가 소프트웨어 / 유틸리티

Download

Installs on: Instrument

운영 체제

  • Windows 7
  • Windows 8
  • Windows 10

선결 조건

  • Download and install Firmware Update Utility software

지원되는 계측기

  • RP7951A, RP7952A, RP7953A, RP7961A, RP7962A, RP7963A

다운로드 방법

  1. Click the Download button.
  2. Save the file to your computer and note the directory where the file is saved. A firmware update installed over the LAN, GPIB, or USB interface is a file with a .upd extension.
  3. Unzip the file to access the .upd file.

설치 방법

  • From the utility directory or Start menu, start the utility (FWUpdate.exe). The utility will prompt you for the location of the .upd file. Follow the additional prompts to complete the installation. The update may take several seconds to complete and will reboot the instrument. After the update is complete, exit the utility.
  • It is not necessary to re-calibrate the instrument following a firmware-update; however, the instrument may need to be re-secured if it was unsecured to perform the update.

라이센스

  • Does Not Require a License

지원 문서

부가 소프트웨어 / 유틸리티

Download

Installs on: Instrument

운영 체제

  • Windows 7
  • Windows 8
  • Windows 10

선결 조건

  • Download and install Firmware Update Utility software

지원되는 계측기

  • RP7951A, RP7952A, RP7953A, RP7961A, RP7962A, RP7963A

다운로드 방법

  1. Click the Download button.
  2. Save the file to your computer and note the directory where the file is saved. A firmware update installed over the LAN, GPIB, or USB interface is a file with a .upd extension.
  3. Unzip the file to access the .upd file.

설치 방법

  • From the utility directory or Start menu, start the utility (FWUpdate.exe). The utility will prompt you for the location of the .upd file. Follow the additional prompts to complete the installation. The update may take several seconds to complete and will reboot the instrument. After the update is complete, exit the utility.
  • It is not necessary to re-calibrate the instrument following a firmware-update; however, the instrument may need to be re-secured if it was unsecured to perform the update.

라이센스

  • Does Not Require a License

지원 문서

부가 소프트웨어 / 유틸리티

Download

Installs on: Instrument

운영 체제

  • Windows 7
  • Windows 8
  • Windows 10

선결 조건

  • Download and install Firmware Update Utility software

지원되는 계측기

  • RP7951A, RP7951AT, RP7952A, RP7952At, RP7953A, RP7961A, RP7962A, RP7963A

다운로드 방법

  1. Click the Download button.
  2. Save the file to your computer and note the directory where the file is saved. A firmware update installed over the LAN, GPIB, or USB interface is a file with a .upd extension.
  3. Unzip the file to access the .upd file.

설치 방법

  • From the utility directory or Start menu, start the utility (FWUpdate.exe). The utility will prompt you for the location of the .upd file. Follow the additional prompts to complete the installation. The update may take several seconds to complete and will reboot the instrument. After the update is complete, exit the utility.
  • It is not necessary to re-calibrate the instrument following a firmware-update; however, the instrument may need to be re-secured if it was unsecured to perform the update.

라이센스

  • Does Not Require a License

지원 문서

부가 소프트웨어 / 유틸리티

Download

Installs on: Instrument

운영 체제

  • Windows 8
  • Windows 7
  • Windows 10

선결 조건

  • Information Not Available

지원되는 계측기

  • RP7951A, RP7951AT, RP7952A, RP7952AT, RP7953A, RP7961A, RP7962A, RP7963A

다운로드 방법

  1. Click the Download button.
  2. Save the file to your computer and note the directory where the file is saved. A firmware update installed over the LAN, GPIB, or USB interface is a file with a .upd extension.
  3. Unzip the file to access the .upd file.

설치 방법

  • From the utility directory or Start menu, start the utility (FWUpdate.exe). The utility will prompt you for the location of the .upd file. Follow the additional prompts to complete the installation. The update may take several seconds to complete and will reboot the instrument. After the update is complete, exit the utility.
  • It is not necessary to re-calibrate the instrument following a firmware-update; however, the instrument may need to be re-secured if it was unsecured to perform the update.

라이센스

  • Does Not Require a License

지원 문서

부가 소프트웨어 / 유틸리티

Download

Installs on: Instrument

운영 체제

  • Windows 8
  • Windows 7
  • Windows 10

선결 조건

  • Download and install Firmware Update Utility software

지원되는 계측기

  • RP7951A, RP7952A, RP7953A, RP7961A, RP7962A, RP7963A

다운로드 방법

  1. Click the Download button.
  2. Save the file to your computer and note the directory where the file is saved. A firmware update installed over the LAN, GPIB, or USB interface is a file with a .upd extension.
  3. Unzip the file to access the .upd file.

설치 방법

  • From the utility directory or Start menu, start the utility (FWUpdate.exe). The utility will prompt you for the location of the .upd file. Follow the additional prompts to complete the installation. The update may take several seconds to complete and will reboot the instrument. After the update is complete, exit the utility. It is not necessary to re-calibrate the instrument following a firmware-update; however, the instrument may need to be re-secured if it was unsecured to perform the update.

라이센스

  • Does Not Require a License

지원 문서

부가 소프트웨어 / 유틸리티

Download

Installs on: Instrument

운영 체제

  • Windows 8
  • Windows 7
  • Windows 10

선결 조건

  • Information Not Available

지원되는 계측기

  • RP7951A, RP7951AT, RP7952A, RP7952AT, RP7953A, RP7961A, RP7962A, RP7963A
SHOW MORE