Technical Support

N4002A SNS Series Noise Source 10 MHz to 26.5 GHz (ENR 15 dB)

  • Resources
  • Drivers, Firmware and Software
  • Training and Events
  • Knowledge Center

Resources

Showing 1 to 12 of 12
Sort by :
Date
Date Title
Filter Results
Reset
By Type of Content
Application Notes
This app note discusses the fundamentals of noise figure measurement using Y-factor method and how to avoid noise figure mistakes.
2024-10-09
Application Notes
Noise figure is often the key to characterizing a receiver and to detect weak incoming signals. Learn to minimize uncertainties in your noise figure measurements.
2024-07-05
Reference Guides
SNS Series Noise Sources Security Features and Document of Volatility
2022-10-12
Technical Overviews
SNS Series of noise sources work in conjunction with NFA Series noise figure analyzers and X-Series signal analyzers.
2020-04-03
Installation Guides
Installation note for the Noise Sources: 346C and N4002A (all serial numbers).
2019-12-18
Installation Guides
Instructions for replacing the attenuator in Noise Sources 346C, 346B, N4001C, and N4002A.
2019-12-18
Application Notes
Explore information on RF and Microwave noise figure measurements, starting from the concept of noise figure and noise temperature, describing the noise characteristics of two-ports networks, and highlighting the different methods used to measure noise figure, such as Y-Factor and the Direct Noise...
2019-10-01
Reference Guides
This is STEP format 3D Model of the N4000A, N4001A, N4002A.
2018-11-23
User Manuals
Operating service guide explains how to operate and/or service the SNS Series Noise Sources: N4000A, N4001A and N4002A.
2017-05-26
Training Materials
The noise figure uncertainty calculator has been created to aid your design work, from components through to systems, helping you meet the continued demand for higher system performance.
2015-05-29
User Manuals
User's guide for the NFA Series noise figure analyzers: N8972A, N8973A, N8974A, N8975A.
2013-02-01
Programming Guides
Programmer's guide with explanations on how to program the analyzer using SCPI commands. For use with the NFA Series noise figure analyzers: N8972A, N8973A, N8974A, N8975A.
2001-05-01
Showing 1 to 12 of 12

Drivers, Firmware and Software

Training and Events

Knowledge Center

Denmark