What are you looking for?
Suggested searches
No product matches found - System Exception
Matched content
Measurement Solution – Digital Pre-Distortion (DPD)
Fine Tune Power Amp Performance Earlier in the Development Cycle, Either in Simulation or with Hardware
- Prove your amplifier may be linearized with DPD
- Accelerate implementation of DPD linearization networks
- Bandwidth configurations up to 800MHz
- Supported technologies include LTE-A Carrier Aggregation, W-CDMA, and 802.11ac
Typical DPD Test Set-Up
Sample Configuration
Software:
Option 1:
- N7614B Power Amplifier Test Signal Studio software
- 89601B 89600 VSA Software with Option 200
- Keysight I/O Libraries, v16.0 or later
Option 2:
- W1461BP SystemVue,
- W1716EP DPD Builder,
- 89601B 89600 VSA Software with Option 200
- Keysight I/O Libraries, v16.0 or later
Hardware Source:
- N5182B MXG Signal Generator with Options 023, 656, 657,503 or 506
Hardware Analyzer:
- N9030B PXA Signal Analyzer with Options B1X, 503 or 508
Wideband DPD Test Set-Up
Signal Analyzer Sample Configuration
Software:
- N7614B Power Amplifier Test Signal Studio software
- 89601B 89600 VSA Software with Option 200*
- Keysight I/O Libraries, v16.0 or later
Hardware Source:
- E8267D PSG Signal Generator with Option 016
- M8190A Arbitrary Waveform Generator with Option 002
Hardware Signal Analyzer:
- N9040B UXA Signal Analyzer with Option B5X
Wideband DPD Test Set-Up
* Required for Oscilloscope configuration; Optional for Spectrum Analyzer configuration
Oscilloscope Sample Configuration
Software:
- N7614B Power Amplifier Test Signal Studio software
- 89601B 89600 VSA Software with Option 200*
- Keysight I/O Libraries, v16.0 or later
Hardware Source:
- E8267D PSG Signal Generator with Option 016
- M8190A Arbitrary Waveform Generator with Option 002
Hardware Oscilloscope:
- Oscilloscope with needed Frequency Range and Bandwidth