N109310CA Electrical TX Test SW for SFF-8431 (SFP+)

Comprehensive compliance and debug solution for SFP+ applications

• Addresses all seven test groups for host, host copper, and module transmit tests, and for receiver test signals
• Measures all of the ~70 parameters
• Convenient utilities to de-skew cables

Flexible and extensible

• Operate on an N1000A/86100D DCA-X oscilloscope, or on a PC connected to an N109x DCA-M via USB
• Control device under test and other equipment
• Test all or selected parameters to compliance limits or custom limits for development

Compatibility

• N1000A/86100D DCA-X Mainframe
• N109X DCA-M Oscilloscope
• N107X Clock Recovery

Reduce your test time from hours to minutes. Use the N109310CA Electrical TX Test SW for SFF-8431 (SFP+) to measure your high speed serial host board, module or IC to all required transmit parameters in the SFF-8431 (SFP+) Specifications.

Keysight offers a wide range of electrical and optical test solutions to address current and emerging communications standards. For SFF-8431 (SFP+), you may choose a hardware combination that addresses your test needs for today, and into the future:

1. N1000A/86100D DCA-X with N1060A/86108B (Integrated “One-Box” solution) - recommended
2. N1000A/86100D DCA-X with DCA module and external clock recovery
3. N109X Electrical DCA-M with external clock recovery

Seven SFF-8431 Interfaces

• Host transmitter output
• Module receiver output
• Host transmitter output for Cu
• Host receiver limiting module test signal
• Host receiver linear module test signal
• Module transmit input signal
• Host receiver stress generator

About 70 Tests

• Signaling rate
• Rise and fall times for outputs and crosstalk
• Differential, single-ended, crosstalk and common mode amplitudes
• Common mode noise
• Jitter: Total, DDJ, UJ, QSQ, 99%, DDPWS
• TWDP (through user-provided script)
• Eye mask
• Differential and common mode S-parameter
• Differential to common mode conversion loss

Time-Saving Features
 

• Complete additional extensive development testing using Debug mode
• De-skew cable length skew
• Control device under test
• Interface with other equipment